Connection lanyards
Lanyards can be used as a restraint or fall arrester with a mobile anchor point, a lifeline or a fixed anchor point. Restraint lanyards do not limit the effects of a fall from height but are to prevent the user from being in an area where a fall from height is possible. Depending on the configuration of the site or the type of anchor point, there are single and double lanyards, halyard, rope and webbing lanyards with large or small opening connectors. Fall arrest lanyards are equipment that limit the effects on a user of a fall from height. This fall arrest PPE include an energy absorber that takes the force of the fall and does not transmit it to the user. There are double versions for ascending and single fall arrest lanyards for horizontal movement.
The vertical lifeline is a fall arrest protection system, allowing traffic to flow freely on the most varied vertical structures.Equipped with a steel hook.5 lengths available, from 25 to 200 cm (9,8'...
Red lanyard with carabiners and flat steel reinforcement hooks at the ends of the legs, as well as E4/E6 combo absorber.
Double lanyard with full fastening.It stretches depending on your movements.The energy absorber design limits fall arrest forces.This lanyard contains:- a PVC damper with protected label- an abrasion-...
Single lanyard with carabiner and flat reinforcing steel hook.In the event of a fall, the lanyard and its energy absorption system stop the fall and reduce the forces felt by the user.
The positioning lanyard is used to enable the work support systems, in addition to a fall arrester.The lanyard fits precisely and very easily to the length required, depending on the specificities of...
This fall arrest lanyard contains a small hook and a scaffolding hook.In the event of a fall, the energy absorber reduces the forces felt by the user.2 designs of scaffolding hook : E4 and E6 lanyard.
4 shops in Canada
Specialist advice, Quotation in 48h
More than 30 years experience
48h shipping on our products in stock
